A licensed plumber installs the drainpipe at the correct location and checks all plumbing pipes and fixtures. A licensed contractor, or equally professional, checks the subfloor and framing. Any required remedial work must be completed before proceeding.

Muraflo pre-tiled shower trays must be handled with care to prevent damage to their mosaic and tile surfaces. The installer will unpack and inspect the tray, separate the template and drain components, and cover the tray until it is safely installed.

After successfully completing the rough-in preparation, unpacking and inspecting, and test-fitting the template, the installer can proceed with installation of the Muraflo shower tray, following the steps as shown in the film. It is strongly recommended that tray installation be carried out by a licensed contractor or equally qualified professional.

After the Muraflo shower tray has been installed, a licensed plumber will connect the drain to the drainpipe. The drain is a top-connect, no-caulk drain. Do NOT use caulk or silicone during drain connection. Once drain connection is complete, the walls can be tiled via conventional means, following best practices for waterproofing around preformed / prefabricated pans.